How to Maintain Your Architecturaldaily — Pro Tips

Architectural maintenance professional using BIM for building systems inspection
ArchitecturalDaily · Building Operations

How to Maintain Your Architecturaldaily — Pro Tips

A technical AEC guide to preventive maintenance, BIM-enabled facility management, building systems, smart controls and commercial touchless faucet lifecycle planning.

Architectural Maintenance Tips

Architectural Maintenance Tips That Protect Building Performance

Effective architectural maintenance is not simply about repairing damaged finishes. It is a coordinated process that protects the building envelope, MEP systems, fixtures, controls, accessibility and operating performance throughout the life of the project.

The most effective maintenance strategy begins before something fails. Architects and facility teams should identify serviceable assemblies, establish inspection intervals, retain manufacturer documentation and create a clear escalation path from routine cleaning to corrective repair.

For high-performance and smart buildings, maintenance also extends into sensors, controls, connected equipment and water systems. That is why this guide moves from whole-building preventive maintenance toward one of the most repetitive but operationally important systems in commercial interiors: the touchless restroom faucet.

Preventive Maintenance

Start With Systems That Affect Safety, Water and Operations

Building maintenance should be prioritized by consequence rather than by visual appearance alone. A discolored finish may be noticeable, but a hidden leak, failed seal, blocked drain or inaccessible control component can have a much larger operational impact.

Water Control Monitor leaks, valves, drains and fixture performance.
Envelope Inspect joints, sealants, glazing and water-entry locations.
MEP Maintain equipment, controls and service clearances.
Digital Systems Keep sensors, controllers and operational data maintainable.
BIM based facility maintenance inspection
Digital Facility Management

Use BIM as an Operations Record, Not Just a Design Model

BIM becomes significantly more useful after construction when asset information remains connected to actual serviceable equipment and building components.

A useful maintenance model should help facility teams locate equipment, identify manufacturer documentation, understand access requirements and compare installed conditions with the design intent.

When the digital record is not maintained, asset data gradually becomes disconnected from the real building. Changes made during repairs, renovations and replacement work should therefore be reflected in the facility record.

Asset ID Record the exact equipment or fixture model.
Location Link components to the actual room and service zone.
Documents Retain manuals, parts lists and warranties.
Changes Update records after replacements or retrofits.
Maintenance Planning Framework

Where Preventive Maintenance Effort Is Commonly Concentrated

The distribution below is an editorial planning framework for this guide, not measured industry statistics. It illustrates where facility teams may allocate review effort based on system consequence and service frequency.

Architect reviewing BIM and building services during maintenance planning
Editorial model: percentages below organize this guide and are not presented as survey findings.
MEP Systems
30%
Envelope + Water
25%
Fixtures
20%
Controls + Sensors
15%
Finish Systems
10%

The highest-priority systems are generally those where failure can produce water damage, loss of service, unsafe conditions or major operating disruption.

Building Envelope

Inspect Water-Control Layers Before Damage Becomes Visible

Many envelope failures become expensive because early indicators are ignored. Sealant separation, staining, condensation or localized corrosion can indicate a larger moisture-control problem.

Sealants Inspect perimeter joints, expansion joints and transitions.
Glazing Review gaskets, perimeter seals and drainage paths.
Roofing Keep drains clear and review penetrations after service work.
Wall Systems Look for staining, cracking and persistent dampness.
Flashings Confirm water is directed outward at openings and transitions.
Documentation Record recurring defects instead of repeatedly treating symptoms.
MEP Maintenance

Protect Service Access During Architectural Upgrades

Renovations often conceal valves, controls, filters or electrical devices behind decorative surfaces. Good maintenance planning preserves access to systems that are expected to be serviced during the life of the building.

Plumbing

Monitor water distribution, fixture performance and drainage.

  • Isolation valves
  • Leaks and seepage
  • Flow restriction
  • Drainage performance
  • Hot-water control

Electrical

Maintain clear access to power supplies and controls.

  • Transformers
  • Control circuits
  • Backup power
  • Battery replacement
  • Labeling

HVAC

Equipment performance depends on accessible service routes.

  • Filter replacement
  • Drain pans
  • Sensors
  • Dampers
  • Control sequences

Water Management

Water use should be monitored as an operational metric.

  • Metering
  • Leak detection
  • Fixture audits
  • Repair tracking
  • Replacement planning
Digital facility management using BIM tablet in modern building
Smart Building Maintenance

Maintain Sensors and Controls as Operational Technology

Building automation is increasingly responsible for HVAC, lighting, access, energy management and other physical building functions.

Once a device controls the physical environment, maintenance needs to include more than cleaning. Facility teams should understand the power source, communication method, controller, software dependency and failure behavior.

Cybersecurity also matters. Current NIST guidance treats building automation systems as operational technology and recommends protecting them while preserving reliability, performance and safety.

Inventory Know what connected devices are installed.
Updates Track firmware and controller changes.
Backup Preserve critical configurations and settings.
Recovery Know how systems return to service after failure.
Smart Restroom Maintenance

Commercial Restrooms Need Preventive Fixture Maintenance

Restroom maintenance should extend beyond cleaning surfaces. Touchless fixtures contain sensors, valves, flow-control components, power supplies and filters that can degrade or drift over time.

Preventive maintenance reduces the chance that a small issue—such as a clogged aerator, weak battery or misaligned sensor—turns into repeated service calls or unnecessary fixture replacement.

Sensor Keep sensing windows clean and verify activation.
Flow Check aerators and outlets for scale or debris.
Power Monitor batteries, transformers and connectors.
Valve Check solenoids, filters and isolation access.
Commercial Fixture Lifecycle

Maintain Touchless Faucets as Building Assets

Commercial sensor faucets should be recorded in the facility asset system with the exact model, power source, flow device, solenoid arrangement and replacement components.

FontanaShowers’ current commercial guidance similarly frames touchless faucets as maintainable assets across specification, installation, commissioning, preventive maintenance, troubleshooting and renewal.

Sensor Window Clean without abrasive materials that may damage the optical surface.
Aerator Remove debris and mineral buildup when flow becomes uneven.
Filter Inspect strainers where the model includes serviceable inlet filtration.
Power Replace batteries before unstable operation becomes a repeated complaint.
Solenoid Confirm valve response when activation becomes delayed or inconsistent.
Records Save sensor settings and replacement-part references after service.
Touchless Faucet Maintenance by Brand

Commercial Sensor Faucets From Leading Manufacturers

Each manufacturer uses different sensing, power and service arrangements. The fixture should therefore be maintained using the documentation for the exact model rather than a generic sensor-faucet procedure.

FontanaShowers commercial touchless faucet
FontanaShowers

Architectural Touchless Series

Fontana commercial ranges include multiple architectural forms and sensing configurations, with model-level specification, installation and maintenance documentation available on many products.

Maintain: sensor window, flow outlet, power, solenoid, filters and recorded sensor settings.
BathSelect commercial automatic sensor faucet
BathSelect

Commercial Infrared Faucet

BathSelect commercial sensor fixtures commonly place electronic and water-control components below the counter, making access planning important for routine maintenance.

Maintain: sensing, batteries or transformer, under-counter valve, mixer, hoses and outlet.
GROHE electronic touchless faucet
GROHE

Electronic Faucet Platform

GROHE electronic faucets use infrared control with model-specific battery, AC and programmable operating functions.

Maintain: sensor cleanliness, programmed settings, power source, mixer and flow outlet.
Preventive Maintenance Schedule

Recommended Inspection Framework for Touchless Faucets

Actual intervals should follow manufacturer documentation, water quality, usage intensity and facility experience. The schedule below is a practical planning framework rather than a substitute for model-specific instructions.

Interval Inspection Typical Corrective Action Record
Routine Cleaning Spout, sensor window, basin and outlet Remove residue using approved non-abrasive methods Repeated spotting or cleaning issues
Monthly / High Use Activation, shutoff and visible leaks Clean sensor; inspect fittings and outlet Response irregularities
Quarterly Flow consistency and splash behavior Clean aerator or flow device Measured or observed flow changes
Semiannual Power condition, connections and filters Replace battery or clean serviceable filtration Battery / component service
Annual Valve operation, hoses, mixer and isolation Replace worn components and verify settings Asset maintenance history
After Renovation Sensor field, basin, lighting and operating conditions Recommission detection and flow if required New baseline settings
Technical Diagnostics

Diagnose the Cause Before Replacing the Faucet

Many sensor-faucet problems are caused by serviceable components rather than failure of the entire fixture.

Symptom Possible Cause First Technical Check
No activation Power loss, sensor obstruction, closed supply Verify supply, battery/AC power and clean sensor
Intermittent activation Sensor contamination, reflection, weak power Clean sensor and test final basin environment
Continuous flow Sensor obstruction, solenoid fault, debris Remove obstruction and inspect valve/solenoid
Low flow Aerator scale, clogged filter, low supply pressure Check outlet and inlet filtration
Splashback Flow too high for basin geometry Check outlet, flow device and spout-to-basin relationship
Temperature drift Mixer setting or supply imbalance Verify hot/cold supply and mixing component
Accessibility Maintenance

Maintenance Must Preserve Accessible Clearances

Repair work can unintentionally reduce accessibility if replacement components, enclosures or stored items intrude into required clearances. After service, verify that the lavatory remains usable as originally designed.

Clear Floor Space Do not block the accessible approach with equipment or storage.
Knee Clearance Keep replacement components outside required knee and toe space.
Reach Preserve usable access to dispensers and related controls.
Exposed Plumbing Maintain required protection from contact.
Sensor Operation Verify activation from the intended accessible position.
Replacement Avoid substituting products that alter the compliant geometry.
Water Management

Use Maintenance Data to Identify Water-Waste Patterns

EPA WaterSense guidance for commercial and institutional facilities recommends structured water-management programs, including metering, leak detection, benchmarking and maintenance of sanitary fixtures.

Track repeated leak repairs by fixture location.
Investigate unexpected changes in metered water use.
Replace worn seals rather than accepting small continuous leaks.
Clean flow controls when discharge becomes irregular.
Compare fixture replacement opportunities with current water targets.
Record maintenance findings to identify recurring product issues.
Technical Specification

What to Include in a Fixture Maintenance Record

Manufacturer: exact brand and product family.
Model: complete catalog number.
Location: building, floor, room and lavatory position.
Power: battery, AC, hybrid or self-generating.
Flow: rated outlet configuration.
Sensor: technology and approved settings.
Solenoid: part number and access location.
Filter: location and cleaning procedure.
Mixer: type and temperature setting.
Finish: exact finish code and cleaning requirements.
Parts: replaceable cartridge, valve and power components.
Warranty: record coverage and installation date.
Commissioning: final approved sensor and flow settings.
Service history: repairs, replacements and recurring faults.
Engineers reviewing digital commissioning and building maintenance records
E-E-A-T Maintenance Principle

Maintenance Decisions Need Traceable Technical Evidence

A good maintenance program does not rely on memory or generic facility habits. Procedures should connect back to installation documents, manufacturer instructions, commissioning records and authoritative building guidance.

This is especially important for smart systems because firmware, controller settings and replacement parts may change over the life of the building.

Keeping a reliable technical record helps prevent later service teams from resetting equipment without knowing why the original settings were selected.

Source Keep manufacturer maintenance documentation.
Baseline Record commissioned settings.
Change Log Document every significant adjustment.
Verification Re-test after repair or replacement.
High-Authority Technical Sources

Building Maintenance & Touchless Fixture Resources

U.S. GSA — Building Operations & Maintenance Guidance on operations, training, resource conservation and maintaining high-performance facilities after construction.
EPA WaterSense — Best Management Practices Commercial water-management guidance covering monitoring, leak detection, maintenance and faucets.
NIST — OT Security Guide Current 2026 draft guidance for operational technology, including building automation and control systems.
U.S. Access Board — Lavatories & Sinks Accessibility guidance covering clear floor space, faucets and exposed plumbing.
Fontana — Touchless Faucet Lifecycle Guide Commercial sensor-faucet guidance covering specification, commissioning, preventive maintenance and troubleshooting.
Sloan BASYS Manufacturer reference for commercial sensor-faucet serviceability and configurations.
ArchitecturalDaily Maintenance Perspective

Good Architecture Remains Good Only When It Can Be Maintained

The strongest architectural maintenance tips are not cosmetic. They protect the systems that keep the building functioning: envelopes that control water, MEP equipment that remains accessible, controls that stay secure and calibrated, and fixtures that can be serviced without destroying finished architecture.

Commercial touchless faucets demonstrate the principle at fixture scale. A sensor faucet combines water delivery, electronics, sensing, temperature control and service access. When those systems are documented and maintained correctly, the fixture remains a manageable building asset rather than a recurring maintenance problem.

Whether a facility uses FontanaShowers, BathSelect, GROHE, TOTO, Sloan, KOHLER or another commercial manufacturer, maintenance should remain model-specific, documented and tied to commissioning records.

The best-maintained building is not the one that never needs service; it is the one designed so service can happen efficiently, safely and without damaging the architecture around it.

Hugo Fenwick

Hugo Fenwick is a staff writer and editorial team member at architecturaldaily.org, covering architecture research, project concepts, materials, and spatial design. Hugo's articles draw on manufacturer documentation, published standards, product specifications, and attributable industry sources.